Here we go, I found a online version of the "Mechanical Service and Repairs New Edison Disc Motor" which has an entire section on remoal of the motor.
Remove the crank, turning counter-clockwise until it comes loose. Pictured is my temporary fix. Next turn on the turntable until it stops to fully unwind the spring.
Remove the reproducer
and the turntable.
Next I removed the control handle for the mute ball. It is held by 2 screws on the botton of the metal plate.
Screw 1
Screw 2
Screw 3
Remove the 3 screws and nuts. I used a wider blade screwdriver.
No comments:
Post a Comment