Final Assembly of the Cabinet

First place one of the side pieces on a flat protected surface.  Next vertically glue in the bottom shelf,  rear panel, mid cabinet shelf, and front piece (that goes between lid and grill). Tap as required with a rubber mallet to ensure they are seated.  Next carefully align and glue in the remaining side piece on top.  Tap in place with rubber mallet.  It is very helpful to have a second person help.  Next reinstall the 4 screws that hold the bottom shelf to the legs.  Finally, use bar clamps to hold everything together while the glue drys.

Cabinet after assembly and clamping

Standing it up.  Notice the rear hinge piece is not installed yet.

A front view

These are the bottom shelf screws that need to be reinstalled.